Zenith SENTRY 2 SMS2049X3 Operating Manual & Warranty

Contents

THE FIRST TIME YOU OPERATE YOUR TVSTEP 1. CONNECT THE POWERA.Plug ),our TV into an unswitched AC power source.B.Turn the TV on by pressing OFF-ON.Do not plug TV into switched outlet on aVCR or cable-TV decoderSTEP 2. USE AUTO CH. (Channel) SEARCHWhen your TV is first powered up you will see the AUTOCH. SEARCH reminder display. AUTO CH. SEARCHfinds all available channels and stores them in the memoryof the TV. To activate AUTO CH. SEARCH, pressADJU ST (ADJ) Left/Right.f\AUTO CH SEARCHPRESS ADJUSTKEY TO STARTSEARCIIING FOR CHANNELS.t _. JAuto Ch. Search Searching for ChannelsReminder Display---> AUTO CH S[ARCHCH ADD/DETUNING BAHDAUTO FI:NE TUNECLOCK SETCAPTIONSSetup Menu with AutoCh. Search Highlightedf --,,AUTO CH SEARCH HASCOMPLETEDTUNING BAND IS [_-----]CHANNELS FOUNDSearch is CompletedCH 13Normal OperationJSTEP 3. SET THE CLOCK1. Press MENU repeatedly until the SETUP MENU isshown.2. Press SELECT (SEL) to highlight CLOCK SET.3. Press ADJUST (ADJ) Left/Right to access thesubmenu for CLOCK SET.4. Use dumbered buttons on remote control to entercorrect time and TIMER to select AM or PM. Youcan also use ADJUST (ADJ) Left/Right to advancethe 24 hour clock.5. Press ENTER (ENT) to start the clock and returnto normal viewing.fAUTO CH SEARCI{CH ADD/DELTUNING BANDAUTO FINE TUNE--:, CLOCK SETCAPTJONSSelecting Clock SetfCLOCK SETPRESS NUMBERSOR ADJUST KEYSClock Set DisplaySTEP 4. USE CH. (Channel) ADD/DELProgram the channels accessed by using CttANNEL (CH)Up/Down. Refer to the CH. ADD/DEL option for details.2731O 2 -- 1