Zenith SM2773BG Operating Manual & Warranty

Contents

SETUP MENUSETUP MENU SETUP MENUTo Access SETUP MENURefer to the "Quick Reference to On-Screen Menus" section for details.Before Using SETUP MENUConnect and turn ON all externalequipment, such as cable TV decoder,VCR, etc. before using any item on theSETUP MENU.-'> AUTO PROGRAMCH. ADD/DELCH. LABELSTUNING BANDAUTO TUNINGCLOCK SETCAPTIONSLANGUAGESTARTSETUP MENUCLCCK SETCAFTIONSLANGUAGESETUP MENU WhilLeVIDEO l orVIDEO 2 Source is ChosenAUTO PROGRAMPurposeFinds all available channels and stores them in the memoryof the TV for access by CHANNEL (CH) Up/Down.Use AUTO PROGRAM only when you first install yourTV, or when you permanently change the connections tothe TV. For example, when you replace the antenna with acable-TV system.• SETUP MENUAUTO PROGRAMCH. ADD/DELCH. LABELSTUNING BANDAUTO TUNINGCLOCK SETCAPTIONSLANGUAGESTARTAUTO PRO.3P_ JVIHAS COMPLETEDTUNING B_ND ISCI"IANNELS FOUNDStatus When Search is CompleteWhen Some Channels Are Not FoundAUTO PROGRAM find,,; only active channels and storesthem in the favorite channel memory. You can add chan-nels to those stored in memory by using the Ctt. ADD/DELoption.Selecting Auto ProgramTo Use AUTO PROGIL_VIPress ADJUST (ADJ) Left/Right to start AUTO PRO-GRAM.CH. (Channel) ADD/DELPurposeLets you add channels to and remove channels from the ac-tive charlnels found when using the AUTO PROGRAM op-tion. In this way you can customize the channels that areaccessed through CHANNEL (CH) Up!Down.To Add a Channel to Scan Sequence1. Use numbered buttons to select the channel youwish to add.2. Add channel by pressing ADJUST (ADJ)Left/Right until the display shows ADD.To Delete a Channel from Scan Sequence1. Use numbered buttons to select the channel youwish to delete.2. Delete channel by pressing ADJUST (ADJ)Left/Right until the display shows DEL.SI=TUP MENUAUTO PROGRAM_- CH ADD/DELOH LABELSTUNING BANDAUTO TUNINGCLOCK SETCAPTIONSLANGUAGECH 13 ADDSelecting Ch. Add!Del2743-0 7 -- 1