Zenith SM2773BG Operating Manual & Warranty

Contents

SETUP MENUCH. (Channel) LABELSPurposeAssigns a network label or name to the selected channels. Ifyou choose the label "ABC" for channel 13, "ABC" ap-pears in the Channel!Time display when channel 13 isselected for viewing.SETUP MENUAUTO PROGRAMCH. ADD/DEL-> CH. LABELSTUNING BANDAUIO TUNINGCLOCK SETCAPTIONSLANGUAGECH 13 ABCSelecting Ch. LabelsTo Use CH. LABELS1. Select a channel by using the number buttons orCHANNEL, Up/Down.2. Press ADJUST (ADJ) Left/Right to sequencethrough the available choices until the desired labelappears.NOTE: To remove an assigned channel label, select thefour dashes.A&EBRAVCNBCDISEWTNHNMAXNOSREQTBNTRAVVCRWWORABCCACNNDISCFAMHSEMEUPBSSCTELETSNVHIYTV iACTS ,M3 C AM CCBC CBN CBSCOM CSPN CTNE_ ]ENC ESPNFNN FOX GALAHSN ][C INSPMMT ]WI'V NBCPLAY .'?'EL QVCS('FI SHOW SINTLC "rN[c TNNTVA "l'_rN USAVISN VJN WGNAvailable ChannLel LabelsfbCH 13_BC10:56_,TEREOChannel/Time Displaywith LabelBETCMTVCTVETHBOLIFENICKRDSTBSTNTVCWTBSTUNING BANDPurposeAllows for setting the TV channel selector (tuner) to matchyour antenna or cable-TV system.If you are having; difficulty tuning channels, the TUNINGBAND may have to be set manually to match your viewingneeds.SETUP MENUAUTO PROGRAMCH. ADD/DELCH. LABELSTUNING BANDAUTO TUNINGCLOCK SETCAPTIONSLANGUAGECABLE-CATVSelecting Tuning BandTo Use TUNING BANDPress ADJUST (ADJ) Imft/Righl to select the tuning bandthat gives you the most channels:• BROADCAST - is used for standard "over-the-air"broadcasts.• CABLE - CATV is used for most standard cable-TV(CATV) systems.• CABLE - HRC is used for cable-TV systems that useHRC (Harmonically Related Carrier).• CABLE - ICC is used for cable-TV systems using ICC(Incremental Coherent Carrier).Available Channels per BandThe channels that are available in the broadcast and cabletuning bands are shown below:BROADCAST Band - VHF 2 to 13, UHF' 14 to 69CATV, HRC and ICC Bands - 1 to 1252743-0 7 -- 2