Zenith Z44SZ80 Installation And Operating Manual

Also see for Z52SZ80: Specifications Service manual Installation and operating guide Service manual Service manual

Owner’s Manual 13Installation• Component Input portsTo get better picture quality, connect a DVD player to thecomponent input ports as shown below.Component portson the TV Y PB P RVideo output portson DVD playerYYYYPbB-YCbP BPrR-YCrP RHow to connect1. Connect the DVD video outputs (Y, P B, PR) to the COMPO-NENT (Y, P B, PR) INPUT jacks on the TV and connect theDVD audio outputs to the AUDIO INPUT jacks on the TV, asshown in the figure.2. If your DVD only has an S-Video output jack, connect this tothe S-VIDEO input on the TV and connect the DVD audio out-puts to the AUDIO INPUT jacks on the TV, as shown in the fig-ure.Note: If your DVD player does not have component video output,use S-Video.How to use1. Turn on the DVD player, insert a DVD.2. Use the TV/VIDEO button on the Remote Control to selectComponent 1 or Component 2. (If connected to S-VIDEO,select the Video2 or Front Video external input source.)3. Refer to the DVD player's manual for operating instructions.DVD SetupDVD SetupS-VIDEOPRP BYMONORGB INPUTCOMPONENTINPUT2 INPUT1DTV/DVD INPUTRGB/DVI INPUT(L)(R)AUDIO(L)(R)AUDIOVIDEO(L)(R)AUDIO(L)(R)AUDIOMONITOROUT INPUT2 INPUT1DIGITAL AUDIOOPTICAL INPUT(COMPONENT2)DIGITAL AUDIOOPTICAL INPUT(DVI)DIGITAL AUDIOOPTICAL OUTPUTANTENNAHDMI1VARIABLEAUDIO OUTUPGRADEPORTCABLE/DVIHDMI2(R) AUDIO (L)S-VIDEOB R (R) AUDIO (L) DIGITAL AUDIOOPTICALPC/DTV(XGA/480p/720p/1080i)DVDNotes:• Digital Audio will not work for Component 1 input source.• Digital Audio operation has priority if Digital Audio and AUDIO L/Rare connected at the same time.orHow to connectConnect the audio and video cables from the external equip-ment's output jacks to the TV input jacks, as shown in thefigure.When connecting the TV to external equipment, match thejack colors (Video = yellow, Audio Left = white, and AudioRight = red).How to use1. Select the input source by using the TV/VIDEO button onthe Remote Control. Note that this TV finds the connectedinput sources automatically for Video 1-2 and Component 1-2. It is presumed that RGB, HDMI1/DVI and HDMI2 sourcesare connected.2. Operate the corresponding external equipment.ExternalExternal A/V Source SetupA/V Source SetupS-VIDEOMONORGB INPUTRGB/DVI INPUT(L)(R)AUDIO (L)(R)AUDIOVIDEO(L)(R)AUDIOMONITOROUT INPUT2 INPUT1VARIABLEAUDIO OUT(L)(R)VIDEOR LAUDIO VIDEOPC/DTV(XGA/480p/720p/1080i) CamcorderVideo GameSet