Zenith Z44SZ80 Installation And Operating Manual

Also see for Z52SZ80: Specifications Service manual Installation and operating guide Service manual Service manual

Owner’s Manual 29OperationCinema 3:2 Mode SetupCinema 3:2 Mode Setup- Most movies are 24 frames/sec, but TV signal is 30 frames/sec.This option lets the TV do 3:2 pull-down operation for you to watchmovies with the best motion appearance.1. Press the MENU button and then use D / E button to select the OPTION menu.2. Press the G button and then use D / E button to select Cinema 3:2 Mode.3. Press the G button and then use D / E button to select On or Off.4. Press EXIT button to return to TV viewing or press MENU button to return to theprevious menu.Aspect Ratio ControlAspect Ratio Control- Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format.When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be dis-played.- Horizon aspect ratio is not available for Component 1-2 (720p/1080i)/RGB-DTV (720p/1080i)/HDMI1/DVI-DTV(720p/1080i), HDMI2-DTV(720p/1080i)/ CADTV, DTV(720p/1080i) input source.- RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio.• Set By ProgramSelects the proper picture proportion to match the source’s image. (4:3 → 4:3, 16:9 → 16:9)• 4:3Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at boththe left and right sides.• 16:9Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.• HorizonChoose Horizon when you want to adjust the picture in a non-linear proportion, that is, more enlarged at bothsides, to create a spectacular view.• Zoom 1Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portionsof the picture will be cropped.• Zoom 2Choose Zoom 2 when you want the picture to be altered, both horizontally extended and vertically cropped. Thepicture taking a halfway trade off between alteration and screen coverage.• Cinema ZoomChoose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging orreducing the picture, the image may become distorted.You can adjust the enlarge proportion of Cinema Zoom using D / E button. The adjustment range is 1~16.1. Press the RATIO button repeatedly to select the desired picture format.You can also adjust the Aspect Ratio in the OPTION menu.Option Menu OptionsOption Menu OptionsNote: This feature operates only in 480i mode.