Zennio Z41 Pro User Manual

Also see for Z41 COM: Configuration guide Configuration guide How to configure Technical documentation

Contents

Zennio Z41 Pro User Manual Manual pdf 144 page image

Z41 Pro / Lite / COMhttp://www.zennio.com Tecnical Support: http://support.zennio.com144The icon of the pairing function contains, on the upper left corner, a service stateindicator. This indicator will automatically update if the state changes.Indicator MeaningNo network connection available.No Internet access available. (*)Waiting for the Remote Control service. (*)Connection and service OK.Remote control in process (remote device currentlyconnected).Table 7 Service States(*) This does not impede remote control through LAN, provided that both Z41 Pro / Z41 COM and the mobiledevice have been updated to versions that support such feature, are connected to the same local areanetwork and have already been paired. See section Remote Applications.Note that the decision of disabling back the Device Pairing parameter or not after thepairing process is up to the integrator, depending on whether the final user needs or notto be allowed to pair their Z41 Pro / Z41 COM with further remote applications in thefuture.It is also remarkable that disabling this icon is independent from disabling the remotecontrol function itself (preventing further pairing does not block the remote access frompreviously paired devices), and that the access to this icon will be anyway subject to thesecurity level set for the Configuration page by the integrator (see section 3.2.8).Note: it is possible to pair multiple Z41 Pro / Z41 COM devices to a particular remoteapplication (or mobile device), as well as pairing a particular Z41 Pro / Z41 COM tomultiple remote applications (or mobile devices).PAIRING PROCEDUREOnce Z41 Pro / Z41 COM has been configured as explained above, pressing on theDevice Pairing icon will bring up a pop-up window similar to Figure 153.