Zennio Z41 Pro User Manual
Also see for Z41 COM: Configuration guideConfiguration guideHow to configureTechnical documentation
                                                                                                                                                                         | |
Contents
| 
Z41 Pro / Lite / COMhttp://www.zennio.com Tecnical Support: http://support.zennio.com146‘PUSH’ NOTIFICATIONSZ41 Pro / Z41 COM incorporates the “push” notification function, which consists innotifying the mobile devices (no matter if the remote control application has been startedor not) about alarm events (see section 3.6.2.5):Alarm activation: a box that has been assigned the Alarm function has eitherreceived the alarm trigger value from the KNX bus, or exceeded the cyclicalmonitoring period.Alarm confirmation: a box with an active alarm has been acknowledged bythe user.Alarm deactivation: a box that has already been acknowledged by the userhas also received the no-alarm trigger value. Therefore, the alarm has beendeactivated and acknowledged.The above notifications are shown on the mobile device (unless “push” notifications aredisabled by the operating system of the device, depending on the user settings) throughmessages similar to the following figure, and according to the label assigned to theinvolved alarm box:Figure 154 Push NotificationNotes:In case of network unavailability, Z41 Pro / Z41 COM will queue all notificationsrelated to the alarm events that may take place and will send them as soon asthe network is available.Queued (unsent) notifications are discarded on external power failures, but noton KNX bus power failures.In the unlikely event of a very long network failure, the queue may become outof space, and therefore further notifications will not be queued. |
Related manuals for Zennio Z41 COM
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine