Zip HydroTap B160 Installation Instructions Manual

801530 - Zip HydroTap B, BA, BHA, BAHA, Installation Instructions - July 2014- V1.08 Page 11 of 32Special Tools Required:In addition to normal tools, the following will be required:For the standard and Mixer taps:• 35mm diameter sheet metal hole punch for sink tops. (Not supplied)• 35mm diameter hole saw for timber bench tops. (Not supplied)• Nut runner tube spanner (supplied) for fixing tap assembly.When installing a font unit, the following will be required:• 108mm diameter sheet metal or hole saw to suit surface being cut.Hole positioning:Position the tap such that it dispenses into the sinkbowl with ample clearance for a cup or tea pot. Al-ternatively, the tap could be mounted away from thesink using a Zip Font, available as an accessory.Section 1Tap installation35mm hole116SinkHydroTap