acopla ARX 1000 Installation Manual
                                                                              | |
Contents
| 
Connecting the Switch to the NetworkBooting the Switch6-6 ARX®1000 Hardware Installation GuideThe boot-up prompts continue until you reach the “Username” prompt. Confirm thatan administrator can log in by using the Crypto-Officer username and password thatyou entered in the initial-boot script. For example:...User Access AuthenticationUsername: adminPassword: mypasswordSWITCH>The switch is now ready for configuration through the CLI. See the CLINetwork-Management Guide (on the documentation CD provided with the switch) forconfiguration instructions.Preparing for Switch ReplacementFor switch replacement, the above process becomes more complicated. This sectionprovides instructions for replacing a defunct switch.Choosing Switch ReplacementThe initial-boot script asks if this is a switch replacement. Answer yes to invoke thequestions that are required to replace the failed switch. For example,...A switch replacement requires additional configuration questions.6. Are you doing a switch replacement?in the format 'yes' or 'no'.(default=no) # yesMatching the Private SubnetThe next set of questions ask for the switch’s private subnet, the private VLAN for thatsubnet, and the VLAN for a private metalog subnet. If the failed switch was in aredundant pair and/or Resilient-Overlay Network (RON), the private subnets of thereplacement switch should match those of the switch that failed. Each ARX uses its |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine