acopla ARX 1000 Installation Manual
                                                                              | |
Contents
| 
Connecting the Switch to the NetworkConnecting the Ethernet Management Port6-16 ARX®1000 Hardware Installation GuideprtlndA1k(cfg)# ...prtlndA1k(cfg)# exitprtlndA1k#If you copied the private subnet and mask from the defunct switch, this completes theswitch replacement. Otherwise, the new switch learns its private subnet from its peer,re-configures itself, and reboots. (A reboot is necessary to change the private subnetof an ARX.)See the CLI Network-Management Guide for detailed configuration instructions.Connecting the Ethernet Management PortAfter you boot the switch, you can connect the Ethernet out-of-band management portto a management station or network. You can use this interface to access theGraphical User Interface (GUI) or the Command Line Interface (CLI). To access theGUI, direct a web browser to the interface over HTTPS (for example,“https://10.1.23.11/”). Use the crypto-officer username and password, entered above,to log in. For the CLI, use SSH with the interface and the crypto-officer username (forexample, “ssh admin@10.1.23.11”).The GUI Quick Start: Network Setup manual contains instructions for getting startedwith the GUI, and the CLI Network-Management Guide contains instructions and bestpractices for using the CLI to manage the ARX. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine