advidia A-46 Quick Setup Manual
                                | |
Contents
| 
Port MappingThe following settings are for TP-LINK router (TL-R410). The settings vary depending on differentmodels of routers.1. Select the WAN Connection Type, as shown below:Figure A.2.1 Select the WAN Connection Type2. Set the LAN parameters of the router as in the following figure, including IP address andsubnet mask settings.Figure A.2.2 Set the LAN parameters3. Set the port mapping in the virtual severs of Forwarding. By default, camera uses port 80, 8000,554 and 8200. You can change these ports value with web browser or client software.Example:When the cameras are connected to the same router, you can configure the ports of a camera as80, 8000, 554 and 8200 with IP address 192.168.1.23, and the ports of another camera as 81,8001, 555, 8201 with IP 192.168.1.24. Refer to the steps as below: |
Related manuals for advidia A-46
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine