advidia A-46 Quick Setup Manual
                                | |
Contents
| 
Advidia A-46 Mini Dome10/16/2012 Page 4A. Network Connectiono To set the network camera via a LAN (Local Area Network), please refer to Section A.1Configuring Camera using LAN.o To set the network camera via a WAN (Wide Area Network), please refer to Section B.2Configuring Camera using WAN.A.1 Configuring Camera using LANTo view and configure the camera via a LAN, you need to connect the network camera in thesame subnet with your computer, and install the SADP or iVMS-4200 software to search andchange the IP of the network camera.Note: For the detailed introduction of SADP, please refer to Appendix 1.The following figures show the two ways of cable connection of a network camera and acomputer:o To test the network camera, you can directly connect the network camera to thecomputer with a network cable as shown in Figure 2-1.o Refer to the Figure 2-2 to set the network camera over the LAN via a switch or a router.Figure 1-1 Connecting DirectlyFigure 1-2 Connecting via a Switch or a Router |
Related manuals for advidia A-46
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine