advidia A-46 Quick Setup Manual
                                | |
Contents
| 
Advidia A-46 Mini Dome10/16/2012 Page 6A.2 Configuring Camera using WANA.2.1 Static IP ConnectionApply a static IP from an ISP (Internet Service Provider). With the static IP address, you canconnect the network camera via a router or connect it to the WAN directly.Connecting the network camera via a router:1. Connect the network camera to the router.2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section A.1.1Detecting and Changing IP Address for detailed IP address configuration of the camera.3. Save the static IP in the router.4. Set port mapping, e.g., 80, 8000, 8200 and 554 ports. The steps for port mapping varydepending on different routers. Please call the router manufacturer for assistance withport mapping.Note: Refer to Appendix 2 for detailed information about port mapping.5. Visit the network camera through a web browser or the client software over the internet.Figure 2-4 Accessing the Camera through Router with Static IPConnecting the network camera with static IP directlyYou can also save the static IP in the camera and directly connect it to the internet withoutusing a router. Refer to Section A.1.1 Detecting and Changing IP Address for detailed IPaddress configuration of the camera.Figure 2-5 Accessing the Camera with Static IP Directly |
Related manuals for advidia A-46
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine