nilan CTS6000 User Manual

Also see for CTS6000: Installation guide User guide

Contents

nilan CTS6000 User Manual Manual pdf 5 page image

User's Guide for CTS6000 Control panel Version 1.00Subject to alteration without notice. NILAN A/S Page 5 of 11Power buttonFigure 5 Power, System in OperationPressing the "POWER" button opens the menu shown in Figure 5. "Stop system" is used to stopthe system or to start it in weekly program mode. If "Stop system" is selected the unit will remainstopped and NOT follow the weekly program.If "Start extended operation" is selected, the unit will continue to run for an additional 2 hours (theduration can be changed via CTS6000 WebControl).Weekly programThe control panel can be used to change the required temperature and start/stop times in theweekly program (setpoints for fan speed or duct pressure can, however, only be changed viaCTS6000 WebControl).The weekly program is opened from the startup display by pressing arrow up or arrow down. Themenu shown in Figure 2 will then appear. Use arrow up or arrow down to select "WEEKLYPROGRAM"Then press arrow right to open the weekly program, see Figure 6.Use arrow up or arrow down to scroll through the various menu options for the day selected. Asstandard, Monday is initially displayed when the weekly program is opened. Six program eventscan be defined for each day of the week. Figures at the top of the display indicate the number ofevents defined for the day in question. For each program event in which the unit is in operation(Program Event: Active), it is possible to change the required settings, see Figure 6. To do so,select the setting to be changed, press SET to change the setting, press arrow up or arrow down toselect the required value and then press SET to save the new setting.To select another day of the week, highlight Monday, press SET, select the required day of theweek using the arrow up or arrow down buttons and then press SET again once the required dayhas been highlighted.Figure 6 Weekly programPROGRAM EVENT : ACTIVETIME : 17:00VENTILATION : HIGH, STDSETPOINT : 20.0COPY TO NEXT NoEXIT SET = CHANGEMondayPROGRAM : 1 2 3 -POWERSTOP SYSTEMSTART EXTENDEDOPERATION