norbar TWC 400 AUTO Operator's Manual

Contents

norbar TWC 400 AUTO Operator's Manual Manual pdf 10 page image

8SET UP INSTRUCTIONSNOTE: If the equipment is used in a manner not specified by the manufacturer, the protectionprovided by the equipment may be impaired.WARNING: ALLOW THE TWC TO EQUALISE TO THE AMBIENT TEMPERATURE /HUMIDITY BEFORE SWITCHING ON. WIPE OFF ANY MOISTURE BEFOREUSE.1. Locate TWCWARNING: THE TWC WEIGHS UP TO 45 KG. ALWAYS USE TWO PEOPLE WHENLIFTING THE TWC.Ensure location can cope with weight of loader.Locate the TWC on a level surface at a comfortable working height.2. Fitting the GuardInsert two of the four shoulder bolts through the two holes in the guard and slide over the neoprene washeras shown in Figure 6.FIGURE 6 – Pairing the Neoprene Washers with Shoulder BoltsFasten the above to the two lower threaded holes on the TWC casing as shown in Figure 7. Use theremaining two Shoulder Bolts to secure the guard to the radial slot and check it functions correctly byopening and closing the guard, also shown in Figure 7.FIGURE 7 – Fitting the Guard