norbar TWC 400 AUTO Operator's Manual

Contents

norbar TWC 400 AUTO Operator's Manual Manual pdf 73 page image

71SPECIFICATIONSSpecification TWC 400 TWC 1500Maximum Output Torque: 400 N·m / 295 lbf·ft 1500 N∙m / 1100 lbf∙ftWrench Length(Torque Radius):Minimum 135mm 135mmMaximum 750mm 1500mmWrench Orientation: Horizontal HorizontalCalibration Direction: Clockwise and Anti-Clockwise Clockwise and Anti-ClockwiseOperating Temperature: 0°C - 40°C 0°C - 40°CDimensions(Maximum):A 620 mm 620 mmB 330 mm 330 mmC 395 mm 395 mmE 1019 mm 1769 mmWeight 40 kg 45 kgDisplay 25.654 cm (10.1 "), LCD, IntelliTouch Pro, 1280 x 800, 16:10Power supply 48VDC, 5.84A, 280.32WVoltage Requirements 110 - 240 Volts AC ± 10% at 47 - 63 Hz.Mains Power Fuse: 2 AInternal Fuse Not user replaceablePower Consumption: 280 W – maximumOperating Temperature Range 0 °C to +40 °CStorage Temperature Range 20 °C to +60 °CMaximum Operating Humidity 80% Relative Humidity @30°CEnvironment: Indoor use within a light industrial environment. IP 40Overload protection Between 20%-50% of the set target torque depending on torquevalueSpeed 1.22 (Degrees per second)Vibration: The vibration total value does not exceed 2.5m/s².Sound Pressure Level LpA = 72.2 dB(A) with no load & 78.7 dB(A) with high torque,with uncertainty K=3dB.Humidity sensor accuracy ±2%RH @ 25°CTemperature sensor accuracy ±1°C maximumDue to continuous improvement all specifications are subject to change without prior notice.NOTE: If equipment is used in a manner not specified by the manufacturer, the protectionprovided by the equipment could be impaired.