Dell SCv3020 manuals
SCv3020
Table of contents
- Table Of Contents
- about this manual
- SCv3000 and SCv3020 Storage System Hardware
- SCv3000 and SCv3020 Storage System Back-Panel View
- SCv3000 and SCv3020 Storage System Drives
- SCv3000 and SCv3020 Storage Controller Features and Indicators
- safety precautions
- electrostatic discharge precautions
- Shut Down the Storage System and Expansion Enclosures
- hard drives
- rack rails
- Install the Rack Rails
- Power Supply and Cooling Fan Modules
- Identify the Failed Cooling Fan
- specifications
SCv3020
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- About This Guide
- About the SCv3000 and SCv3020 Storage System
- Expansion Enclosures
- Back-End Connectivity
- SCv3000 and SCv3020 Storage System Hardware
- SCv3000 and SCv3020 Storage System Back-Panel View
- Expansion Enclosure Overview
- Install the Storage Center Hardware
- Electrical Safety Precautions
- General Safety Precautions
- Connect the Front-End Cabling
- Connecting to Host Servers with Fibre Channel HBAs
- Cable the Storage System with 2-Port Fibre Channel IO Cards
- Cable the Storage System with 4-Port Fibre Channel IO Cards
- Labeling the Front-End Cables
- Connecting to Host Servers with iSCSI HBAs or Network Adapters
- Cable the Storage System with 4–Port iSCSI IO Cards
- Connect a Storage System to a Host Server Using an iSCSI Mezzanine Card
- Connecting to Host Servers with SAS HBAs
- Attach Host Servers (Fibre Channel)
- Attach the Host Servers (iSCSI)
- Connect the Management Ports to the Management Network
- Connect the Back-End Cabling
- SCv3000 and SCv3020 and One SCv300 and SCv320 Expansion Enclosure
- SCv3000 and SCv3020 and Two SCv300 and SCv320 Expansion Enclosures
- SCv3000 and SCv3020 Storage System and One SCv360 Expansion Enclosure
- Label the Back-End Cables
- Discover and Configure the Storage Center
- Locate Your Service Tag
- Deploy the Storage Center Using the Direct Connect Method
- Set System Information
- Configure Key Management Server Settings
- Configure iSCSI Ports
- Configure Time Settings
- Update the Storage Center
- Modify iDRAC Interface Settings for a Storage System
- Perform Post-Setup Tasks
- Change the Operation Mode of a Storage Center
- Test Storage Controller Failover
- Send Diagnostic Data Using SupportAssist
- Adding or Removing Expansion Enclosures
- Add the SCv300 and SCv320 Expansion Enclosures to the A-Side of the Chain
- Add the SCv300 and SCv320 Expansion Enclosures to the B-Side of the Chain
- Install New SCv360 Expansion Enclosures in a Rack
- Add the SCv360 Expansion Enclosures to the A-Side of the Chain
- Adding a Single Expansion Enclosure to a Chain Currently in Service
- Check the Drive Count
- Add an SCv300 and SCv320 Expansion Enclosure to the B-Side of the Chain
- Add an SCv360 Expansion Enclosure to the A-Side of the Chain
- Add an SCv360 Expansion Enclosure to the B-Side of the Chain
- Removing an Expansion Enclosure from a Chain Currently in Service
- Release the Drives in the Expansion Enclosure
- Disconnect the SCv300 and SCv320 Expansion Enclosure from the B-Side of the Chain
- Disconnect the SCv360 Expansion Enclosure from the A-Side of the Chain
- Disconnect the SCv360 Expansion Enclosure from the B-Side of the Chain
- Troubleshooting Storage Center Deployment
- Set Up a Local Host from Initial Setup
- Set Up Multiple VMware ESXi Hosts in a VMware vSphere Cluster
- Install the USB Serial Port Driver
- Discover the Storage Center Using the Setup Utility
- Storage Center Information
- Additional Storage Center Information
- Settings by HBA Manufacturer
- QLogic HBAs
- Settings by Server Operating System
- Microsoft Windows Server
- Novell Netware
- Flow Control Settings
- Other iSCSI Settings
manualsdatabase
Your AI-powered manual search engine