2gig Technologies Go!Control Panel Installation & Programming Manual
Also see for Go!Control Panel: User guideInstallation and Programming Technical TrainingUser guide
                                                                              | |
Contents
| 
Go!Control Wireless Security System | Installation and Programming Guide52 Copyright © 2014 Linear LLCSummary of RF Keypad ScreenAfter setting all the options for a sensor, the RF keypadsummary screen is displayed. The screen can also bedisplayed for programmed RF keypads by pressing the Sumbutton.• To return to programming, click the Edit Current orEdit Next buttons.• Pressing Skip goes to question Q5 (Control Panelprogramming).• To exit programming, click Skip then End and Exit.Upon exit, the Control Panel takes several secondsto restart.RF Keypad Programming QuestionsQ4: Select RF Keypad # (1 to 4)Up to four (4) wireless keypads can be programmed for usewith each Control Panel. The options for each sensor areprogrammed with sub‐option questions:• Begin by entering the RF Keypad number or select itusing the ← or → arrows.• Program the RF keypads by using the ↑ and ↓arrows to select the sub‐options.To skip RF Keypad programming, press Skip to jump fromquestion Q4 to question Q5 (Exit Delay programming).Q: Select RF Keypad (#) Used (0 to 1)DEFAULT: (0) UnusedUsers can use RF keypads together with a Control Panel ornot.• The default setting (0) Unused sets all RF keypads asunused.• To enable programming for this RF keypad, select(1) Used.Q: Select RF Keypad (#) Equipment Code (0-9999)DEFAULT: (0000) OtherThe RF keypad equipment code defines the sensor’smanufacturer and type.• The default setting is (0000) Other.• Select (0867) 2GIG Wireless Keypad.• Select (1059) 2GIG TS1 Wireless TouchscreenKeypad.NOTE: The 2GIG Wireless Touch Screen Keypad is notintended for UL 985: Household Burglar‐Alarm SystemUnits installations.Q: Enter RF Keypad # Other Equipment Code (0-9999)DEFAULT: 0NOTE: This question is only displayed if (0000) Other isselected as the RF keypad’s equipment code.IMPORTANT: The equipment code is a four (4)‐digit codethat is assigned to the appropriate keypad model beingused.• Enter the equipment code number for the RFKeypad.Q: Enter RF Keypad# Serial Number (7 Digits)DEFAULT: 0000000orRF Keypad (#) Keypad ID (read‐only)Serial numbers for standard wireless keypads can bemanually entered or learned from the keypad. For WirelessTouch Screen Keypads, serial numbers can only be learnedfrom the keypad. Read‐only with Keypad ID’s refer to theinstaller being unable to manually input an id.Standard Keypads:• For manual entry, enter the Wireless Keypad thatwas logged for the keypad being programmed.Press the Shift button to access alpha characters.• For automatic entry, press Shift and then Learn.This places the Control Panel into learning mode.When you trigger the keypad the sensor for thekeypad being programmed, it sends its serialnumber to the Control Panel.Wireless Touch Screen Keypads (only available in someregions):• For Wireless Touch Screen Keypads press Learn.TheControl Panel displays the “Pair with TS‐1. Initiatinglearning process.” Press the keypad’s Pair withPanel button. When complete, the keypad and theControl Panel display “The learn operationsucceeded” message.• The Control Panel displays “RF Keypad (#1‐4)” toidentify the keypad.• The keypad displays “Network ID: xxxx” which is itsunique serial number.• Press OK on both the Control Panel and theWireless Touch Screen Keypad to continue.NOTE: The Wireless Touch Screen Keypad will display “Thesecurity system is temporarily not operational” afterlearning the Keypad. This is normal, and will bedisplayed anytime the Control Panel is in systemconfiguration (programming) mode.Q: Select RF Keypad# Equipment Age (0 to 1)DEFAULT: (0) NewThe Control Panel can be used with new or existing RFkeypads.• If this RF Keypad is new for the installation, leavethe default of (0) New.• If this RF Keypad is already installed, select (1)Existing. |
Related manuals for 2gig Technologies Go!Control Panel
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine