3Com 3C10122 - NBX Business Telephone Installation Manual

Also see for V3000 ANALOG: Administrator's guide Quick reference guide Reference guide

Contents

3Com 3C10122 - NBX Business Telephone Installation Manual Manual pdf 152 page image

152 CHAPTER 6: BRI-ST D IGITAL L INE CARDVerifying a BRI-STDigital Line CardAfter you Auto Discover a BRI-ST Digital Line Card, you can verify that itwas properly discovered by using the NBX NetSet utility, described next,or by viewing the card’s status lights, which is described later.Using the NBX NetSetUtilityTo verify that the BRI-ST card has been properly discovered:1 Log in to the NBX NetSet utility using the administrator username andpassword.2 Click the Click PSTN Gateway Configuration > Digital Line Cards.3 Examine the list of Digital Line Cards to find the BRI-ST board with thecorrect MAC address. The Type column should contain BRI and the Statuscolumn should contain Ready.4 Click the MAC address for the card to open the Modify page.5 In the Channel List, click each entry to view that channel’s status andverify that the each channel has an extension number.6 Verify that the Status column contains Ready for each channel.You can also use the status lights on the front of the card to verify that aBRI-ST Digital Line Card has been properly discovered. See page 45 fordetails about BRI-ST card status lights.You are now ready to configure the ISDN BRI-ST Digital Line Card. SeeChapter 3, “Device Configuration,” in the NBX Administrator’s Guide.