4-6 CHAPTER 4: PERFORMING TROUBLESHOOTING AND DIAGNOSTIC TESTSThe diagnostic programs listed above come on the EtherDiskdiskette that accompanied the adapter.4 From the main menu, select Echo Server Setup.The program notifies you that your computer is now set upas an echo server.Starting the Group 3 TestTo run the Group 3 test on a Fast EtherLink PCI adapter,follow these steps:1 Start the Configuration and Diagnostic Program.This program must be on the computer containing theadapter you want to test.2 Select Test Setup from the Test menu.3 Select Group 3 from the Group Select box.4 Enable the Group 3 test by highlighting the command button.5 Highlight and press [Enter].6 Go to the Run dialog box to start the tests.Table 4-1 Adapter and Diagnostic Program Names (10 Mbps Adapter Only)Diagnostic Program Name Adapter3C503 EtherLink II‚ or II TPEtherLink II/16 or II/16 TP3C505 EtherLink Plus‚3C507 EtherLink 16 or EtherLink 16 TP3C5X9CFG EtherLink III family3C523 EtherLink/MC3C523TP EtherLink/MC TP3C527 EtherLink/MC 32
