3 Installing the NIC Driver and Software in Windows24Updating the Network Driver and NIC SoftwareThe latest 3Com drivers can be downloaded from:http://www.3com.com/Using DiskettesTo update the driver using diskettes that were downloaded from the Web or that werecreated using the EtherCD:1 Open the Windows Device Manager.2 Locate the 3Com NIC under Network Adapters, and then click Properties.3 Select the Driver tab.4 Click Update Driver.5 Follow the prompts on screen and insert the correct diskette when prompted.Using the EtherCDTo update the driver and NIC diagnostic software using the EtherCD:1 Turn on the power to the PC and start Windows.2 Insert the EtherCD in the appropriate drive in the PC.The EtherCD Welcome screen appears.If the EtherCD Welcome screen does not appear, enter the following command fromthe Run option of the Windows Start menu:d:\installs\setup.exewhere d:\ represents the letter name of the drive your are using.3 Click NIC Software.4 Click NIC Drivers and Diagnostics.5 Click Update.To update the network driver only, click Update Drivers and remove DiagnosticsProgram.To update the network driver and NIC diagnostics software, click Update Drivers andDiagnostics Program.6 Follow the prompts on the screen.
