3Com 3C905CX User Manual
Also see for EtherLink 3C900B: Installation and operating instructionsUser guide
                                                                                | |
Contents
| 
Configuring the DynamicAccess LAN Agent59Configuring the DynamicAccess LAN AgentConsult your system administrator about using DynamicAccess technology at your site.The instructions in this section are for configuring the DynamicAccess LAN agent on alocal PC. You can obtain the complete configuration instructions by accessing the 3ComDynamicAccess Technology User Guide on the EtherCD.To configure the DynamicAccess LAN agent on a local PC:1 Double-click the 3Com DynamicAccess icon in the Windows Control Panel.The Traffic Prioritization tab of the DynamicAccess Setup screen appears.2 Select the tab containing the information you want to configure.Traffic Prioritization — Allows you to prioritize applications, which can easebottlenecks in your network and allow critical applications to take networkprecedence.Fast IP—Allows you to enable and configure Fast IP.Administration—Allows you to set DynamicAccess control panel access, set VLANoptions, enable efficient multicast control, and enable the prioritizing of traffic.Removing the DynamicAccess LAN AgentFor instructions on removing the DynamicAccess LAN agent from your PC, refer to theDynamicAccess Software User Guide. This user guide can be accessed on the EtherCD.NOTE: The DynamicAccess LAN agent configuration instructions are intended fornetwork administrators who have experience installing software and usingmanagement tools for an Ethernet network.NOTE: For specific instructions on configuring any of the DynamicAccesstechnology options, click Help on the 3Com DynamicAccess screen or go to:http://www.3com.com/dynamicaccess |
Related manuals for 3Com EtherLink 3C900B
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine