4-2 3COM Security Switch 6200 Hardware and Software Users GuideConfiguring the Security Switch 6200 SystemConfiguration Menu==================1) System Parameters2) User Authentication and Access Control3) Network Time Protocol (NTP)4) Domain Name Service (DNS)5) Simple Network Management Protocol (SNMP)6) Alarm Monitors7) Physical Interfaces8) Tap Interfaces9) Network Interfaces10) IP Aliases11) Static Routes12) Static ARP Entries13) Virtual Router Redundancy Protocol (VRRP)14) Network Interface Module ConfigurationX) ExitTo begin your configuration, select the desired option from the main menu.NOTE: Within this configuration tool, you can type the initial letter of anoption and the press the Tab key to complete the entire string on supportedchoices. The Enter key is used to select default values.ConfiguringSystemParametersThis section describes how to change your system settings. Specifically,how to:• Change the system host name and domain name• Change system information• Change time information• Enable external access abilityTo configure system parameters:1. Select Option 1 from the main menu.The present System Configuration is displayed. For example:System======Host Name heliosDomain NameDate and Time Mon Apr 07 15:28:27 EDT 2003Time ZoneTelnet Server enabledFTP Server enabledWEB Timeout 20Default Gateway 192.168.10.1Would You Like to Modify the System Parameters orN>[N]: