3Com 3CR13501-73 Hardware And Software Manual

Also see for 3CR13501-73: Datasheet Release note

Contents

4-30 3COM Security Switch 6200 Hardware and Software Users GuideConfiguring the Security Switch 6200 System3. Enter the desired ICMP rate limiting value and press Enter. Forexample:Set ICMP Rate limiting (KB/sec) [0]: 2000NIM Configuration==================Max ICMP Rate (KB/sec) 2000You are returned to the Main menu.Exiting fromtheConfigurationToolTo exit from the system Configure Tool, select Option X from the main menu.Enter choice <1 - 14, X>[X]: XSaving YourSystemConfigurationTo save your configuration, at the admin prompt, use the following command:[admin@xxxxx bin]# ./cos_show_system -f /directory/filenameWhere the directory specifies the directory where the file is located, andthe filename is the actual configuration file. The following is an example ofthis command:[admin@xxxxx bin]$ ./cos_show_system -f /tmp/fooRestoringYour SystemConfigurationTo restore your configuration to its previous configuration, at the adminprompt, use the following command:[admin@xxxxx bin]# ./cos_set_system -f /directory/filenameWhere the directory specifies the directory where the file is located, andthe filename is the actual configuration file. The following is an example ofthis command:[admin@xxxxx bin]$ ./cos_set_system -f /tmp/fooDisplayingYour SystemConfigurationTo display a configuration, at the admin prompt, use the following command:[admin@xxxxx bin]# ./cos_show_systemThe following is an example of this command:[admin@xxxxx bin]$ ./cos_show_systemhostname="xxxxx"domainname="3com.com"timezone="America/New_York"telnet_server="enabled"ftp_server="enabled"gateway="192.168.10.1"