Saving Changes 129Saving Changes There are two ways to save your changes to non-volatile storage usingthe Web Interface:n Select Save Configuration from the Configuration task button, Switchoption.This field contains a drop-down list box that allows you to select eitherthe primary or secondary configuration area. After you select theconfiguration area, click Submit to save the changes.For more information on the primary and secondary configuration areas,refer to Chapter 10.n Click the Logout button.If you attempt to log out without saving your changes, the WebInterface prompts you to save your changes.If you select Yes, the changes are saved to the selected configurationarea. To change the selected configuration area, you must go to theConfiguration task button, Switch option.Do a Get WhenConfiguring a VLANWhen configuring a VLAN using the Web Interface, prior to editing theVLAN configuration, you must first click the get button to ensure thatsubsequent edits are applied to the correct VLAN. If you do not click theGet button and you submit the changes, the changes will be made to theVLAN that was previously displayed.If you configure a VLAN and then delete it, the default VLAN is shown inthe VLAN name window, but the VLAN information contained in thelower portion of the page is not updated. Click the Get button to updatethe display.
