3Com Baseline 2816 User Manual

Also see for 3CBLUG16A - Baseline Switch 2816: User guide User guide

Contents

3Com Baseline 2816 User Manual Manual pdf 31 page image

Configuring Port Settings 31Table 8 IP Setting OptionsAfter you configure the Switch’s IP address settings,click Apply to save your changes.Configuring Port SettingsUsing the Web interface, you can configure thespeed/duplex and flow control settings of each port.You can also view the current connection status of eachport or shut down or disable ports.Two tabs are available on the Port Configuration page:■ Basic Port Configuration■ Advanced Port ConfigurationBasic Port ConfigurationUse the Basic Port Configuration tab to enable anddisable the port and its flow control settings and to setthe speed/duplex of the port.The following options are available:■ Number – Physical port numberOption DescriptionManagement VLAN Indicates the VLAN from which the Webinterface can be accessed. By default, allports belong to VLAN 1. If you createother VLANs, you will only be able toaccess that Web interface from a com-puter that belongs to VLAN 1.IP Address Mode Specify how the Switch will get its IPaddress. Available options include:■ DHCP – Select this option if youhave a DHCP server on the net-work and you want the Switch toautomatically obtain an IP addressfrom it■ Static – Select this option if youwant to manually assign an IPaddress to the SwitchIP Address Specify an IP address that you want toassign to the Switch. This option is onlyavailable if IP Address Mode is set toStatic.The IP address that is assigned to theSwitch also becomes the IP address forVLAN 1.Subnet Mask Specify a subnet mask address that youwant to assign to the Switch. Thisoption is only available if IP AddressMode is set to Static.The default subnet mask is255.255.0.0.Default Gateway Specify the IP address of the gatewayrouter between this Switch and man-agement stations on other networksegments. This option is only available ifIP Address Mode is set to Static.MAC Address Read-only field that displays theSwitch’s MAC or physical addressOption Description