3Com Baseline 2816 User Manual

Also see for 3CBLUG16A - Baseline Switch 2816: User guide User guide

Contents

3Com Baseline 2816 User Manual Manual pdf 35 page image

Configuring VLANs 35happens, you will need to reset the Switch to factorysettings.To create a VLAN:1 On the menu, click VLANs. The VLANs page appears.2 In VLAN ID, click Create New VLAN.3 In VLAN ID (1-4094), type an unused ID number for theVLAN that you are creating. VLAN IDs range from 1 to4094.Figure 15 Create VLANs Page4 Define the VLAN membership by setting the state ofeach port. To change states, click the icon under theport number repeatedly to cycle through the differentstates. Available states include:■ N – Not a member■ U – Uplink egress packets■ D – Desktop egress packets5 Click Apply to create the VLAN.For examples on setting up VLANs, refer to “SampleVLAN Configurations” on page 35.Sample VLAN ConfigurationsTo illustrate how you can segment network devices thatare connected to the Switch, the following sampleconfigurations are provided.Setting Up Two VLANs on the Same SwitchFigure 16 illustrates how you can set up a simple VLANon the Switch using desktop connections.