Upgrading Legacy Link Card Software 17310 Disconnect the serial cable from the Gateway card.11 Ensure that the Gateway card has completed its reboot (check indicatorLEDs on the front panel).12 Re-connect the RJ21 and external power connectors to the front of theGateway card.Upgrading SoftwareVersions 3.0.0.0 andLaterFollow these instructions if your Gateway is currently running 3.0.0.0 or alater release. An NBX reboot is required. The Gateway card is updated atthe next Gateway reboot (usually at the same time as the NBX reboot).Ensure that users are notified that the phones will be out of serviceduring this period.The upload package is supplied as a set of files in a zipped folder. Thesemay be installed anywhere convenient on your PC.1 Unzip the zip into a new folder named according to the software releaseversion (). Ensure you unzip with folders enabled, to preservethe file structure supplied.2 Log in to the NBX NetSet utility using the administrator login ID andpassword.3 Click Licensing and Upgrades > Third party Drivers, and then click Install.4 Browse to the folder …Full Loader\NBX and select the .taz file. ClickUpgrade to upload the .taz file. When complete, NBX NetSet promptsyou to reboot the NBX system.Installing the Software Using Auto-UploadThe software on the Gateway card will automatically update at the nextreboot if the software version on the NBX is a different version to thatwhich is already on the Gateway flash load. The Gateway will rebootwhen the NBX reboots, or if manually reset.If an update is available on the NBX, the Gateway detects the newsoftware, loads it into flash, and automatically reboots. The externalpower supply for the Gateway card must be connected, to ensure theGateway reboots when the NBX does
