Forwarding Incoming Calls 53Setting Call Forwardfrom the TelephoneYou can set call forwarding from your telephone. You choose thecondition for call forwarding (default, no answer, busy, or all) and thedestination. When you specify an external telephone number as thedestination, start by entering a 9 or 8 or whatever is required to access anoutside line. Example: 912815551212 dials (281) 555-1212. You canenter a * if a pause is required between an access code and a destinationnumber.The number that you choose may be limited by your call permissions. Toview your permissions, log in to NBX NetSet utility and go to My CallingPrivileges > Call Permissions.From the telephone, you can set call forwarding using feature codes. Usethe NBX NetSet utility to see your call forwarding settings. Youradministrator can also set programmable Access buttons for callforwarding. The display panel shows your current call forwarddestination.Forward to MailFrom the telephone, you can set your 3Com Telephone so that allincoming calls go directly to your default call coverage point, usually yourvoice mailbox. You can change the destination to the Auto Attendant orreceptionist or a different telephone number. This feature is referred to asFWD MAIL, Forward to Mail, Forward All Calls to Voice Mail, and ForwardAll Calls to VM. When Forward to Mail is in effect, your telephone ringsonce before forwarding the call to your default call coverage point.On a 3Com Cordless Telephone:1 Remove the handset from the charging unit.2 Press Feature + 440.3 To turn off FWD MAIL, remove the handset from the charging unit andpress Feature + 440 again.To set your default call forwarding destination, use the NetSet utility. See“Default” later in this section.To prevent the telephone from ringing even once, use the Do Not Disturbfeature (see “Managing Off-site Notification Using the Telephone” inChapter 5) or use the Call Forward All feature (see “Call Forward All”later in this section).
