B-36 A PPENDIX B: CLI COMMAND DESCRIPTION Actual Negotiated Downstream Baud Rate: Actual Negotiated Upstream Baud Rate:show adsl version Fields: ADSL hardware release version: 0x3530 ADSL Alcatel chipset firmware release version: 141show bridge network counters [Received Frames, Transmit Frames, Discarded] settings [Interface, Network Address, Frame Type, Status, User Name,Spanning Tree Enabled]show bridge settings Displays the settings for all bridge networks. Use set bridge to modify these values. Base Aging Time - time to age out a known MAC address, default 300 Spanning Tree Forward Delay - delay after coming up before learning,default is 15 Spanning Tree Priority - this bridge’s bid to be root bridge, default is32768 Access MACs Only - This can be enabled or disabled. Spanning Tree Mode - sets spanning tree algorithm on. Default isDISABLED Base MAC Address - address of the bridge Number of Networks - number of networks in this bridge Type - type of bridge: TRANSPARENT_ONLY is the defaultshow call_log Displays the current call status of a specified VC.Fields: Call State: current call state of the call (i.e. Disconnected, Connecting,Connected).Parameters Descriptioncounters Displays information about the specified bridge network. It lists:Received Frames - packet frames which have been receivedTransmit Frames - packet frames which have been sentDiscarded - packet frames which have been thrown awaysettings Displays information about the specified bridge network. You use add bridgenetwork to define bridge networks.Interface - the interface this bridge is usingNetwork Address - index number for this bridge networkFrame Type - BRIDGE is the defaultStatus - ENABLED or DISABLED are optionsUser Name - user to supply parameters for this bridgeSpanning Tree Enabled - ENABLED or DISABLED