B-6 A PPENDIX B: CLI COMMAND DESCRIPTION name [name] node [internal_node_number] socket [socket_number] type [service_type]Adds a static IPX service (for the WAN) to the IPX services table. You must supplythe name, internal ipx network number, node number, socket, and type of servicefor this service. The user must also supply gateway information to indicate thenext router hop.Below is a partial list of the IPX services available:Parameters Description The name of the user for the IPX route.Petitioned IPX address of the route, in IPX (xxxxxxxx) form.Hops An integer representing how far away the route is, in “hops” through otherrouters. Values are 1-15.name Estimated interval in ticks it takes to deliver a packet to the remote network.There are approximately 18 ticks per second.node The internal MAC address of the server on which the service resides. This istypically 00:00:00:00:00:01.socket Indicates which “socket” the server listens on.type Type of service: hex number referring to file server, print server, etc. Refer tothe table below.Type Description04 file server05 job server07 print server09 archive server0A job queue21 NAS SNA gateway2E dynamic SAP47 advertising print server4B Btrieve VAP 5.04C SQL VAP7A TES-NetWare VMS98 NetWare access server9A Named Pipes server9E PortableNetWare-UNIX107 NetWare 386111 Test server166 NetWare management26A NetWare management26B Time synchronization278 NetWare Directory server
