Using the Menus 43Figure 38 PathBuilder S330/S310 Main MenuUse the options on the main menu as follows:n Select [1] System Administration to access common parameters.n Select [2] Configuration Management to view or set configuration parametersfor cards, ports, PVCs, video dialup, and other hardware and software features.n Select [3] Fault Management to view or acknowledge alarms and setloopbacks.n Select [4] Performance Management to view statistical data.n Select [5] Exit to log out.Using the Menus The title of the menu or display appears at the top of the screen. Your accessstatus appears in the upper righthand corner.n Read-Write means that you have Read-Write control of the PathBuilderS330/S310 and can make changes to the system.n Read Only means that you can only monitor the menus and displays.Only one Read/Write session is allowed at any given time. The first session is theRead/Write session. Subsequent simultaneous sessions are Read Only.Navigating Through theMenusYou select a menu option by typing the selection number and pressing [Enter].Displays that contain information and no selections include the prompt:Press Esc for previous menuMulti-page displays also prompt you to press “N” for the next page or “P” for theprevious page.Only the main menu contains the Exit selection to log out. Selecting Exit returnsyou to the title screen with the password prompt. All other menus have a Previousmenu selection which returns you to the main menu one screen at a time. You canalso press [Esc] to move back one menu at a time.