3Com V7111 - VCX 4 Channels Analog FXO Media Gateway User Manual
Also see for VCX V7111: Product guideUser manualUser guideInstallation guideInstallation guide
                                                                                                                                                                      | |
Contents
| 
3Com VCX V7111 VoIP SIP Gateways User Manual 107An additional level of protection is obtained by a restriction that no more than three IPaddresses can access the Embedded Web Server concurrently. With this approach, a fourthuser is told that the server is busy, even if the correct username-password was provided.The Embedded Web Server Username-PasswordThe default username-password for all Gateways is: Username = Admin Password = AdminChange the Web password using the Advanced Configuration Menu > Change Passwordselection and then follow the pop-up window directives. The password can be a maximum ofseven characters. The new password is active only after restarting the Gateway using theReset button of the Embedded Web Server. Otherwise, the old password is still active.You can reset the Web username-password (to the default values) using an INI fileparameter called ResetWebPassword. The Web password is automatically the defaultpassword.Web ConfigurationThe Embedded Web Server can be configured using INI file parameters.Read-only ModeThe Embedded Web Server can be initialized to read-only mode by setting theDisableWebConfig = 1 INI file parameter (the default state is read-write mode). In this mode,all web pages are presented in read-only mode. By selecting this mode, you disable thecapability to modify the configuration data. In addition, you do not have access to theChange Password page or to the Reset page. When the Gateway is controlled through PCI,the Embedded Web Server is always in read-only mode.Disable/Enable Embedded Web ServerTo deny access to the Gateway through HTTP protocol, you have the capability to disablethe Embedded Web Server task. To disable the Web task, use an INI file parameter calledDisableWebTask. The default is to Web task enabled. When the Gateway is controlledthrough PCI, the Embedded Web Server is always activated.Using the Embedded Web ServerThis section explains how to use the Embedded Web Server. After the initial IP address isset to the Gateway it is possible to connect with the integral web-based configurationapplication. |
Related manuals for 3Com VCX V7111
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine