3Com VCX V7111 VoIP SIP Gateways User Manual 139To install the BootP/TFTP Configuration Utility, unzip the TP3.810.exe file and navigate tothe BootP *.exe file. The installation procedure is facilitated by prompts. After completing theprocedure, open Start>Programs>BootP; the BootP/TFTP Server main screen is displayed.Logging ScreenThe 3Com BootP/TFTP Configuration Utility main screen (Figure 61 on page 141) includesthe Log line, printed per BootP request with the following parameters: Hardware (MAC) address Status (found or not found in cache) Date and Time Assigned IP address (if found) Client nameClicking Log line shows all BootP reply parameters or enables entry to a new entity.Preferences WindowThe Preferences Window (Figure 62 on page 143) is used to define BootP and TFTPconfiguration parameters: TFTP directory INI File Mask Boot File Mask TFTP timeout and number of retransmissions BootP replay type (broadcast or unicast) BootP ARP mode (dynamic or static) Number of initiated BootP replies (send after remote reset), optionally used when theGateway (2FXS, 4FXS, 4FXO, 8FXS, 8FXO, or 24FXS), is installed behind the firewallthat blocks BootP broadcast requests.Client Configuration WindowThe Client Configuration Window (Figure 63 on page 144) shows: All client entities MAC Name IP per entity
