3Com VCX 2102 Telephone Manual

Also see for VCX 2102: Telephone guide

Contents

3Com VCX 2102 Telephone Manual Manual pdf 65 page image

Speed Dialing 65down Volume Control buttons repeatedly until the volume is at thelevel you prefer. You can change the volume during a conversation orby listening to the dial tone.■ Headset Volume (Model 3102 only) — During a call, press the up ordown Volume Control buttons repeatedly until the volume is at thelevel you prefer.■ Speaker Volume — To raise or lower the volume of the speaker,press the Speaker button and then press the up or down VolumeControl button repeatedly until the volume is at the level you prefer.You can change the volume during a conversation or by pressingSpeaker and listening to the dial tone.For Model 2101 (Basic Phone), you must activate the speaker by pressingFeature + 104 and then adjust the speaker volume.Speed Dialing This section describes how to set up one-touch speed dialing. One-touchspeed dialing is available on the Business phones (Models 2102 and3102) but not on the Basic phones (Models 2101 and 3101).You can, however, enable speed dialing for all VCX phones through theVCX 7000 User Interface. See Chapter 7. This type of speed dialingrequires pressing a sequence of buttons. With one-touch speed dialing, anumber is mapped to one dedicated speed dial button.On the 2102 Business phone, the speed dial buttons are Buttons 3through 7 counting from the top of the Access buttons. See Figure 3.On the 3102 Business phone, the speed dial buttons are Buttons 1through 4 on the left-hand side of the Access buttons counting from thetop. See Figure 7.To set up speed dialing using the Program button and the Speed DialAccess buttons:1 Press the Program button.2 Press the Speed Dial Access button to which you want to associate atelephone number.This message appears on the Display Panel: Speed Dial - <#>:Where <#> is the number of the speed dial Access button you selected.3 Use the keypad to enter the number.