Gateway Installation 345ID Values:■ Integer. Range = 0-4095■ Example Commands:vcxSetVLANConfig 1,2This command enables VLAN operation on the virtual LAN with ID = 2.vcxSetVlanConfig 0This command disables VLAN operation.To verify the current settings use the nbxShowConfig and vcxShowConfigcommand.14 Enter this command to restart the Attendant Console and activate theconfiguration changes:nbxResetThis command copies the contents of the non-volatile memory to theactive network settings for the Attendant Console.The Attendant Console communicates with the Primary VCX Server. Usethe Administrator Interface to:■ Associate the Attendant Console with a particular phone■ Perform the remaining configuration of the Attendant Console (forexample, mapping extensions to Attendant Console buttons)For instructions on how to perform these tasks, see the VCXAdministration Guide.GatewayInstallation3Com V7111 AnalogGatewaysV7111 Analog Gateways connect the VCX system in two directions:■ FXO versions connect to analog trunk lines from the Public SwitchedTelephone Network (PSTN).■ FXS versions connect to analog telephones or fax machines.There are 4-port and 8-port FXO versions of the V7111.There are 2-port, 4-port, 8-port, and 24-port FXS versions of the V7111.In addition, one model of the V7111 has 4 FXO ports and 4 FXS ports.
