Editing Option 184 Values 3699 Click OK.In the Predefined Options and Values dialog box, the DHCP MicrosoftManagement Console creates a new option name by combining theoption number with the name that you chose and adds this name to theOption name drop-down list.Example: If you used VCX as the option name, the system adds 184 VCXto the drop-down list.Editing Option 184ValuesTo edit Option 184 values:1 Select the new option name from the Option name drop-down list, andclick Edit Array. The Numeric Value Array Editor dialog box appears.2 In the Data entry area of the dialog box, click the Decimal radio button atthe right of the word Format.3 In the Current Values text box, highlight the 0 (zero), and click Remove.4 To create the new value, enter each element of the new value:a Click in the New value text box.b Type the individual element value.c Click Add.Configuring theIP Address of thePrimary ServerSuboption 1 of option 184 defines the IP address of the VCX PrimaryServer. For each element in Table 14, repeat steps 4 a, b, and c, listed atthe beginning of this topic. As you add each element, it appears in theCurrent values list, above previously added values.Add these elements in this order:Table 14 Configuring the IP Address of the Primary ServerWhat You Type Description1 Enter 1 as the first suboption code for option 184.4 The length of the argument that applies to this suboption. Foroption 184, suboption 1, the argument is an IP address, which iscomposed of four numerical fields (octets).NOTE: The next four fields use 10.234.1.254 as an example IP address of the VCXPrimary Server. Enter the IP address of your primary server.10 The first octet in the IP address.
