3Com VCX V7111 Fast Track Installation Guide 45C HAPTER 6: MONITORING THE VCX V7111The VCX V7111 provides the following ways of monitoring the status of the gateway: Monitoring the VCX V7111 front panel LEDs (see “Monitoring the VCX V7111 FrontPanel LEDs” below). Monitoring the VCX V7111 rear panel LEDs (see VCX V7111 Rear Panel LEDs on page46). Monitoring the VCX V7111 channels via the Embedded Web Server (see “Monitoring theVCX V7111 Channels” on page 46).Monitoring the VCX V7111 Front Panel LEDsThe VCX V7111 front panel LEDs indicate the Ethernet LAN status, Data (RTP) activity andstate of the gateway ports. Table 11 describes the meaning of each state of the LEDs on thefront panel.Table 11 Definition of VCX V7111 Front Panel LED IndicatorsLED Type Color State DefinitionGreen ON Device powered, self-test OKOrange Blinking Software loading/InitializationReady DeviceStatusRed ON MalfunctionGreen ON Valid 10/100 Base-T Ethernet connectionLAN EthernetLink Status Red ON MalfunctionGreen Toggles/ BlinkingMGCP:Changes between green and off. Indicates activity,control messages are received in real time.H.323 / SIP:Sending and receiving H.323 / SIP messages.Control ControlLinkBlank No traffic.Green Blinking Transmitting packetsRed Blinking VCX V7111 is receiving data packetsData PacketStatusBlank No trafficGreen ON The phone is off-hooked (FXS); the FXO off-hooksthe line towards the PBX.Channels TelephoneInterfaceGreen Blinking There’s an incoming call, before answering