13Remote controlPutting batteriesPlease load the batteries before using the remote control. If the remote control starts tomalfunction, replace the batteries. If you will not use the remote control for an extendedperiod, remove the batteries from the remote control and store them in a safe place.1. Slide back and remove thebattery cover in the directionof the arrow.2. Align and insert the two AAbatteries according to theirplus and minus terminals as indicated in the remote control.3. Replace the battery cover in the direction of the arrow and snap it back into place.Laser pointer7KLVUHPRWHFRQWUROKDVDODVHUSRLQWHULQSODFHRID¿QJHURUURG7KHODVHUEHDPZRUNVand the LASER INDICATOR lights while the LASER button is pressed.Remote controlWARNING ŹThe laser pointer of the remote control is used in place of a¿QJHURUURG1HYHUORRNGLUHFWO\LQWRWKHODVHUEHDPRXWOHWRUSRLQWWKHODVHUbeam at other people. The laser beam can cause vision problems.CAUTION ŹUse of controls or adjustments or performance of proceduresRWKHUWKDQWKRVHVSHFL¿HGKHUHLQPD\UHVXOWLQKD]DUGRXVUDGLDWLRQH[SRVXUHWARNING ŹAlways handle the batteries with care and use them only asdirected. Improper use may result in battery explosion, cracking or leakage,ZKLFKFRXOGUHVXOWLQ¿UHLQMXU\DQGRUSROOXWLRQRIWKHVXUURXQGLQJHQYLURQPHQW%HVXUHWRXVHRQO\WKHEDWWHULHVVSHFL¿HG'RQRWXVHEDWWHULHVRIGLIIHUHQWtypes at the same time. Do not mix a new battery with used one.• Make sure the plus and minus terminals are correctly aligned when loading a battery.• Keep a battery away from children and pets.• Do not recharge, short circuit, solder or disassemble a battery.• 'RQRWDOORZDEDWWHU\LQD¿UHRUZDWHU.HHSEDWWHULHVLQDGDUNFRRODQGGU\SODFH• ,I\RXREVHUYHDOHDNDJHRIDEDWWHU\ZLSHRXWWKHÀRZHUDQGWKHQUHSODFHDEDWWHU\,IWKHÀRZHUDGKHUHV\RXUERG\RUFORWKHVULQVHZHOOZLWKZDWHULPPHGLDWHO\• Obey the local laws on disposing the battery.LASER INDICATORLASER button3M™ Digital Projector X90© 3M 2007. All Rights Reserved.