3M X90 Operator's Manual

Also see for X90: Brochure & specs Application guide Specifications Network function guide

3M X90 Operator's Manual Manual pdf 19 page image

19Adjusting the zoom and focus1. Use the zoom ring to adjust the screen size.2. Use the focus ring to focus the picture.OperatingFocus ringZoom ringAdjusting the lens shift1. Use the vertical lens shift dial to shiftthe picture upward or downward.2. Use the horizontal lens shift dial toshift the picture left or right.Using the automatic adjustment feature1. Press the AUTO button on the remote control. For an RGB signalThe vertical position, the horizontal position, the horizontalphase and the horizontal size will be automatically adjusted.And the aspect ratio will be automatically set to default. Make sure that theapplication window is set to its maximum size prior to attempting to use thisfeature. A dark picture may still be incorrectly adjusted. Use a bright picturewhen adjusting. For an M1-D signalThe aspect ratio will be automatically set to default. For a video signal or s-video signalThe video format best suited for the respective input signal will be selectedautomatically.This function is available only when the AUTO is selected to the VIDEOFORMAT item in INPUT menu ( 32). For a component video signal, theVLJQDOW\SHLVLGHQWL¿HGDXWRPDWLFDOO\LQGHSHQGHQWO\RIWKLVIXQFWLRQ For a video signal, s-video signal or component video signalThe vertical position, horizontal position and aspect ratio will be automaticallyset to default. For a component video signalThe horizontal phase will be automatically set to default.Ɣ7KHDXWRPDWLFDGMXVWPHQWRSHUDWLRQUHTXLUHVDERXWVHFRQGV$OVRSOHDVHnote that it may not function correctly with some input.ESC MENU RESETPOSITION AUTOMAGNIFY MY BUTTON VOLUMEENTERPAGE UP PAGE DOWN2/51/101/10UPDOWNRIGHTLens shift coverLEFTNOTE • When the vertical lensshift is adjusted, it is recommended toshift the picture upward.Top3M™ Digital Projector X90© 3M 2007. All Rights Reserved.