3M X90 Operator's Manual
Also see for X90: Brochure & specsApplication guideSpecificationsNetwork function guide
                                                                      | |
Contents
| 
16Power on/offTurning on the power1. 0DNHVXUHWKDWWKHSRZHUFRUGLV¿UPO\DQGcorrectly connected to the projector and the outlet.2. Remove the lens cover, and set the power switch tothe ON position.The power indicator will light up in steady orange ( 63).Then wait several seconds because the buttons may notfunction for these several seconds.(1) When AUTO ON in OPTION menu is set to TURN ON ( 42) :The lamp will only be automatically turned on when thePower switch is turned on after the power was turned off byPower switch last time. Afterwards the POWER indicatorwill begin blinking in green. When the power is completelyon, the indicator will stop blinking and light in green.(2) When AUTO ON in the OPTION menu is set to TURN OFF( 42): Please see step 3.3. Press the STANDBY/ON button on the projector or theremote control.To display the picture, select an input signal according to the section"Selecting an input signal" ( 18).Turning off the power1. Press the STANDBY/ON button on the projector or the remotecontrol.The message "Power off?" will appear on the screen for about 5seconds.2. Press the STANDBY/ON button on the projector or the remotecontrol again while the message appears.The projector lamp will go off, and the POWER indicator will beginblinking in orange.Then the POWER indicator will stop blinking and light in steadyorange when the lamp cooling is complete.3. Make sure that the power indicator lights in steady orange, and set the powerswitch to the OFF position. The POWER indicator will go off. Attach the lens cover.Do not turn the projector on for 10 minutes or more after turning it off. Turning the projectoron again too soon could shorten the lifetime of some consumable parts of the projector.POWER(Steady orange)POWER(Blinking in green)POWER(Steady green)BLANK LASERASPECTESC MENU RESETPOSITION AUTOMAGNIFY MY BUTTON VOLUMEON 1MUTEOFF 2FREEZE KEYSTONE SEARCHPUSH ENTERPAGE UP PAGE DOWNSTANDBY/ON VIDEO RGBLASERINDICATORSTANDBY/ONbuttonPOWERindicatorPower off?WARNING ŹA strong light is emitted when the projector’s power is on. Do not look intothe lens of the projector or look inside of the projector through any of the projector’s openings.ŹDo not touch around the lamp door and the exhaust vents during use or justafter use, since it is too hot.NOTE • Turn the power on/off in right order. Please power on the projector priorto the connected devices. Power off the projector later than the connected devices.• Use the shutdown switch ( 65) only when the projector is not turned off by normal procedure.Power on/offPOWER(Blinking in orange)POWER(Steady orange)3M™ Digital Projector X90© 3M 2007. All Rights Reserved. |
Related manuals for 3M X90
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine