3M mp8749 User Manual

Also see for Multimedia Projector MP8749: Quick start guide Operator's guide Information sheet Technical manual Basic technical manual

3M mp8749 User Manual Manual pdf 10 page image

ENGLISH-10ENGLISH-10OOOO PPPP EEEE RRRR AAAA TTTT IIII OOOO NNNN SSSS (((( cccc oooo nnnn tttt iiii nnnn uuuu eeee dddd ))))Basic OperationThe basic operations shown in Table 3 is performed from the supplied remote control transmitter orthe projector control panel. Items indicated by (*) may be used from the control panel.Table 3 . Basic OperationItem DescriptionINPUTSELECTSelect Input Signal (*) : Press the INPUT button.RGB IN 1→RGB IN 2→ VIDEO IN → S-VIDEO IN → COMPONENT VIDEO (→ RGB IN 1)Select RGB Input : Press the RGB button.VIDEO IN / S-VIDEO IN / COMPONENT VIDEO → RGB IN 1 / RGB IN 2RGB IN 1 → RGB IN 2 (→ RGB IN 1)Select Video Input : Press the VIDEO button.RGB IN 1 / RGB IN 2 → VIDEO IN / S-VIDEO IN / COMPONENT VIDEOVIDEO IN → S-VIDEO IN → COMPONENT VIDEO (→ VIDEO IN)• The selected signal name is displayed for approximately 3 seconds when the inputsignal is changed.POSITIONSet/Clear Position Adjustment Mode : Press the POSITION button.The [ ] icon is displayed in the POSITION mode.Image Position Adjustment: Press the , , and buttons in thePOSITION mode.• Valid only in the MAGNIFY mode with a video signal is input.• After approximately 10 seconds of inactivity the [ ] icon is extinguished and thePOSITION mode is cleared automatically.• , , and buttons may operate as the mouse control button. Refer to page 4.RESET (*)Initialise Each Item : Select an item and press the RESET button.Initialise Position Adjustment : Press the RESET button and thePOSITION mode. This function is valid only when RGB signal is input.• Valid except for the VOLUME, LANGUAGE and H PHASE.• The RESET button may operate as the mouse control button. Refer to page 4.MAGNIFYSet MAGNIFY Mode : Press the MAGNIFY button.Move Magnified Area : Run the POSITION in the MAGNIFY mode.Adjust Magnification : Press the MAGNIFY / button in MAGNIFYmode.Clear MAGNIFY Mode : Press the MAGNIFY button.• The MAGNIFY mode is cleared by running or setting the AUTO, ASPECT, INPUTSELECT or VIDEO, or by changing the input signal.OFFFREEZESet/Clear FREEZE Mode : Press the FREEZE button. The [II] icon isdisplayed, and the image frozen, in the FREEZE mode.• The FREEZE mode is cleared by running or setting POSITION, VOLUME, MUTE,Automatic Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing theinput signal.• Do not forget to clear frozen static images.• Use the remote control transmitter at a distance of approximately 5m from the sensor onthe front of the projector, and within a range of 30° left-right. Strong light and obstacles willinterfere with operation of the remote control transmitter.NOTE