3M mp8749 User Manual
Also see for Multimedia Projector MP8749: Quick start guideOperator's guideInformation sheetTechnical manualBasic technical manual
                        | |
ENGLISH-9ENGLISHENGLISH-9OPERATIONSOPERATIONSPower ON1. Check that the power cord is connected correctly.2. Set the power switch to [ | ]. The standby mode is selected, and the POWER indicator is turned toorange.3. Press the STANDBY/ON button on the control panel or the remote control transmitter.Warm-up begins and the POWER indicator blinks in green.4. The POWER indicator ceases blinking and turns to green when power is on. Open the slide lensdoor.5. Adjust picture size using the zoom knob.6. Adjust focus using the focus ring .Power OFF1. Press the STANDBY/ON button on the control panel or the remote controller. Then,themessage "Power off?" will appear on the screen, and the message will disappear by any operationor no operation for 5 seconds. During this message indication, press the STANDBY/ONbutton again. The projector lamp is extinguished and lamp cooling begins. The POWER indicatorblinks orange during lamp cooling. Pressing the STANDBY/ON button has no effect whilethe POWER indicator is blinking.2. The system assumes the Standby mode when cooling is complete, and the POWER indicatorceases blinking and changes to orange. Check that the indicator is orange and set the powerswitch to [O].3. The POWER indicator is extinguished when power is off. Do not forget to close the lens door.STANDBY/ONLASERBLANKRGBVIDEOAUTOMENUMENU SELECTKEYSTONERESETFREEZEMAGNIFYPOSITIONOFFVOLUMEMUTESTANDBY/ON Button• Except in emergencies, follow the above-mentioned procedure for turning power off.Incorrect procedure will reduce the life of the projector lamp and LCD panel.• To prevent any troble, turn on/off the projector when the computer or video tape recorder is OFF.Providing a RS-232C cable is connected, turn on the computer before the projector.• When a projector continues projecting the same image, the image may remain as an afterimage.Please do not project the image same for a long time.NOTEWARNING • Please read this manual, and the separate “SAFETYINSTRUCTIONS” thoroughly before using the equipment. Always ensure thatthe equipment is used safely.Power SwitchSlide Lens DoorSTANDBY/ON ButtonPOWER IndicatorZoom KnobFocus Ring |
Related manuals for 3M Multimedia Projector MP8749
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine