3ware Disk Array Configuration Utility42 3ware Escalade ATA RAID Controller User GuideFigure 22. Select Available Drive to Replace Faulted Drive,RAID 1 Example9 Navigate to the Rebuild Array button and press Enter.10 Navigate to and select the OK button to continue.A status screen will display, with your requested array and memberdrives.Figure 23. Rebuild Array Status Display, RAID 1 Example11 Press F8 to save your configuration and reboot the system.The rebuild will start within a few minutes of the 3ware driverloading, once the operating system has booted.Restore Initial ValuesPrevious/Next Toggle Hot SpareCancelSelect/DeselectDoneAlt-F1F6EnterF8$EscHelp3 w a r e D i s k A r r a y C o n f i g u r a t i o nCreate Array Delete Array Maintain Array Rebuild ArrayAvailable Drives:Port 2 - QUANTUM FIREBALLP LM30 30.0GB*Port 3 - QUANTUM FIREBALLP LM30 30.0GBDisk Arrays:*Array Unit 1 - 2 drive Mirror 30.0GB DEGRADEDPort 1 - QUANTUM FIREBALLP LM30 30.0GBRestore Initial ValuesPrevious/Next Toggle Hot SpareCancelSelect/DeselectDoneAlt-F1F6EnterF8$EscHelp3 w a r e D i s k A r r a y C o n f i g u r a t i o nCreate Array Delete Array Maintain Array Rebuild ArrayAvailable Drives:Port 2 - QUANTUM FIREBALLP LM30 30.0GBDisk Arrays:Array Unit 1 - 2 drive Mirror 30.0GB REBUILDING (after F8)Port 1 - QUANTUM FIREBALLP LM30 30.0GBPort 3 - QUANTUM FIREBALLP LM30 30.0GB