Checking Array Statuswww.3ware.com 91Figure 42. 3DM User Login DisplayEnable/disable password protectionWith the 3DM password utility enabled, using 3DM will require entering thepassword into the login display shown in Figure 41. To enable password pro-tection, be sure to perform the setup procedure on page 89, then select theEnabled option in the Password Setup portion of the 3DM Settings display(see Figure 40). To disable the utility, you must log in as an Administratorbefore you are permitted to select the Disabled option in the Settings win-dow. If both Administrator and User Passwords are enabled, you are promptedfor both the User and Administrator passwords.Selecting background task rateBackground Task Rate allows a user to set the relative performance of nor-mal IO and background tasks.Selecting remote accessRemote Access, if enabled, allows a remote machine to connect to 3DM. Ifthis option is disabled and a user attempts to connect to 3DM remotely anerror message will be displayed. This setting defaults to “Disabled”.Selecting cache optionsThe 3DM Settings display provides a selection for enabling or disabling thedrive’s write cache. See “Select write cache properties” on page 34 for moreinformation.
