Exiting the 3BM Configuration Utilitywww.3ware.com 57Note: If you have a combination of 7000/8000-series and9000-series controllers in your system, the 7000/8000-seriescontrollers are not listed on the selection screen shown inFigure 25. Instead, an additional BIOS summary will appearfor the 7000/8000-series controller, similar to Figure 24. Toaccess the BIOS utility for the 7000/8000-series board, pressAlt-3 when the information for that controller appears.Although similar to 3BM, some screens and features aredifferent for the 7000/8000-series. For detailed information,see the version of the 3ware Escalade ATA RAID ControllerUser Guide that supports the 7000 and 8000 series controllers.If you have two 9000 controllers that have different versions ofthe BIOS installed, they will also appear in different BIOSsummaries, and will launch different versions of 3BM.Exiting the 3BM Configuration UtilityWhen you are ready to exit the 3BM configuration utility, you have the optionto save the configuration changes you have made, or to discard the changes.To save your configuration modifications1 Press the F8 or Esc key.A list of affected drives appears, and a messages ask you to confirm theconfiguration.2 Type Y.The booting process resumes.To exit without saving changes1 Press Esc.2 If you have unsaved changes, 3BM will ask you whether you want to savethe changes and exit, or exit without saving the changes.If you want to exit without saving changes, type N.If you change your mind and want to save the changes, type Y.
