Chapter 6. 3ware Disk Manager (3DM 2)82 3ware Serial ATA RAID Controller User GuideTo set up event notification1 Click 3DM 2 Settings on the menu bar.2 In the E-mail Notification section of the 3DM 2 Settings Page, enter orchange the settings you want.• Enable or Disable all notifications.• Set the severity level of events for which e-mail notifications are sent.• Specify the email address of the sender. This will appear in the“From” field of the e-mail.• Enter the e-mail address(es) to which notifications are sent. (Separatemultiple addresses with a comma (,) or a semicolon (;).• Enter the SMTP server name or IP of your mail server.3 Click Save E-mail Settings.To send a test messageYou can send a test message to make sure you’ve entered the e-mailnotification settings correctly.• Click Send Test Message.Enabling and Disabling Remote AccessWhen remote access is enabled, a user can connect to 3DM over the internetor an intranet, to check status or administer the controller and associateddrives.If remote access is disabled and a user attempts to connect to 3DM remotely,they will see the following error message: “Remote Access to 3DM has beendisabled. Please connect using the local machine by entering “localhost” inthe URL bar.”Remote access can be enabled or disabled on the 3DM 2 Settings page.To enable or disable remote access1 Click 3DM 2 Settings on the menu bar.2 In the Remote Access section of the 3DM 2 Settings Page, select eitherEnabled or Disabled in the Allow Remote Connections field.The page refreshes, and a message at the top of the screen confirms thatremote access has been enabled or disabled.
