4IPNET OWL800 User Manual

4IPNET OWL800 User Manual Manual pdf 3 page image

User’s ManualIEEE802.11 b/g Outdoor AP/Bridge (Support IEEE802.11a Client Backhaul) OWL800 / OWL2000 / HSG800ENGLISHRegulatory InformationThe device contains two radio modules inside. Although the model of the radio modules themselves has obtainedthe FCC modular approval, independently the whole system (with the antennas and power supplier installed) hasbeen tested and evaluated again by a certified laboratory for the verification of FCC, CE and NCC compliances.This device requires professional installation. Installers please refer to the caution statements under eachregulatory section to make sure the final installation meet the regulation within you territory. If you are in the NorthAmerica, please read the caution statements in FCC section. If you are in the Europe countries, please read thecaution statements under CE. And if you are in Taiwan, please read the Chinese statements under NCC. In addition,it is important for all to read the following Safety Information first.Safety InformationAll models of OWL800, OWL2000, and HSG800 have been evaluated to, and conforms to the product safety specifications ofEN:60950:2001+A11:2004.Caution: This product was qualified under test conditions that included the use of the power supplying equipment. To ensureregulatory and safety compliance, use only the provided power supplying equipment and install them properly. To prevent electrical shock, this device may require a grounding conductor in the line cord. Connect the unit to a groundingtype ac wall outlet using the power supplying equipment supplied with the unit. To avoid the risk of electric shock and for a safety outdoor installation, you may need other items, such as surge arrestors. To avoid the risk of electric shock from lightening, do not install or use this product during an electrical storm. Operate and install this product as described in this manual. This device must be installed and used in strict accordancewith the manufacturer's instructions. Do not open the device casing. Do not perform any servicing other than that contained in the installation andtroubleshooting instructions. Refer all servicing to qualified service personnel.