4IPNET OWL800 User Manual

4IPNET OWL800 User Manual Manual pdf 86 page image

User’s ManualOWL800 / OWL2000 / HSG800 ENGLISH© 2008 4IPNET, INC.774.5.3 Backup & RestoreThis function is used to backup and to restore the OWL800 settings. The OWL800 can also be restored to thefactory default settings using this function. It can be used to duplicate settings to other access points (backupsettings and then restore in another AP).Gateway & AP Mode Reset to Default: Click Reset to load the factory default settings of the OWL800. After confirming thisaction, the system will reset all parameters. Reboot to let the default settings takes effect. Backup System Settings: Click Backup button to save the current system configurations to a backup fileon a local disk of the management console. A backup file for OWL800 keeps the current system settings aswell as the local user accounts. Before any configuration changed, it is recommended to backup the systembefore you proceed with any changes; thus, it can be recovered soon if occasionally something wronghappened. Restore System Settings: Click on the Browse button to select configuration file to restore, and then,press Upload to proceed. After confirming the action, the system will start to replace the existing settingswith this newly upload one; reboot the system as required to ensure the parameter changes take effect.Since network parameters have been reset/restored, the administrator may need to change PC’s networksettings in order to match OWL800’s default settings.