4IPNET OWL800 User Manual

4IPNET OWL800 User Manual Manual pdf 60 page image

User’s ManualOWL800 / OWL2000 / HSG800 ENGLISH© 2008 4IPNET, INC.514.2.5 AdvancedVirtual AP advanced settings should mostly meet general requirements. Take the following parameters for thepurpose if occasionally it is necessary to tune or debug the wireless network.Gateway & AP Mode Beacon Interval: This interval specifies the time interval, in milliseconds. Between each beacon frame istransmitted. RTS Threshold: To control station access to medium and to alleviate this effect of the hidden terminal problem,we can tune this RTS threshold value. It should have a value among 1-2346 and is default to 2346. Fragmentation Threshold: A unicast frame larger than this threshold will be fragmented before thetransmission. If significant numbers of collisions are occurring, we can try to take a smaller value of thefragmentation threshold to see if it helps. Broadcast SSID: Disable this item will prevent the OWL800 from broadcasting its SSID publicly. Wireless Station Isolation: By enabling this item, all stations in the same OWL800's coverage area can onlycommunicate with the OWL800 only. WMM: To decide which data streams are most important and assign them a higher traffic priority, we mayenable this feature. It is default disabled. IAPP: To provide a better roaming capability for the stations among APs nearby the OWL800, we can enablethis item. Its default disabled.